TRIUMF AG - Hitachi Projector

Hitachi Projector

The Hitachi CP-SX5600Ws are SXGA (1365x1024) digital projectors with 6 switchable inputs:
Assignments (September 18 2003)

Input Left Projector Right Projector

Composite Video (NTSC) VCR unused

S-Video DVD Polycom Viewstation

Component Video (CMY) unused unused

DVI (digital VGA) unused unused

RGB1 (VGA) Linux workstation Linux workstation

RGB2 (VGA) visual presenter unused

Input	Left Projector	Right Projector
Composite Video (NTSC)	VCR	unused
S-Video	DVD	Polycom Viewstation
Component Video (CMY)	unused	unused
DVI (digital VGA)	unused	unused
RGB1 (VGA)	Linux workstation	Linux workstation
RGB2 (VGA)	visual presenter	unused

The two projectors are aligned so that the images fit together; please do not adjust the zoom.

Note: In the projector menu, there are three settings for aspect ratio (yellow icons at bottom):

4x3 - expand input to projector native resolution (1365x1024)
16x9
small 4x3 - show input at direct resolution, with black border

The "small 4x3" setting gives a sharper, if smaller, display. This is the normal setting for both projectors

Remote Control

Currently the Hitachi projectors are controlled via an infrared remote; see image below. The projector has warm-up and cool-down cycles; the lamp does not light straight away on switch-on and the fan is initially on high (noisy). This is normal. Please switch off when not in use; the lamps are expensive. A green light on the unit indicates "on", an orange one indicates "standby". Flashing orange indicates power-down cycle; the unit will not respond to commands during power-down.

The two projectors are identical and both respond to the same remotes. To control only one unit, stand under the other one.

hitachi remote

TRIUMF VideoConferencing

A.Daviel